OPERATING SYSTEM SOFTWARE (OSS) MESSAGES
OS2650
Status file nearly full
Execute status file save procedure
Use SFS CLEAR after file save.
Minimal space remains in the status file memory. When new
data is stored, the oldest report data could be lost.
Action
1. Copy the current status file to magnetic tape.
2. Enter the SFS CLEAR command and then the SFS CREATE
command to create a new status file.
OS2660
Do you want report accounting? [Y or N]
This prompt appears at the end of the sysgen process.
Action
Perform one of the following actions:
•
Enter Y to create an accounting file for 2,000 reports.
•
Enter N to create an accounting file for 100 reports.
OS2667
Enter ‘PQA CANCEL’ to cancel or ‘CONTINUE O’ to initiate
You entered the PQA command at the beginning of your job.
The printer has detected data in the IOT.
Action
Perform one of the following actions:
•
Enter the PQA CANCEL command to abort the process.
•
Enter the CONTINUE command to begin the print quality
adjustment.
OS2668
Enter ‘CONTINUE O’ to initiate print quality adjustment
You entered the PQA command. The print quality adjustment is
pending.
Action
Enter the CONTINUE command to begin the print quality
adjustment.
OS2669
Enter ‘PQA START’ command to initiate print quality
adjustment
The print quality adjustment is not pending.
Action
Enter the PQA START command to begin the print quality
adjustment.
OS2670
Enter PQA or SUB INK command or abort report or print job
The printer cannot successfully run the job. You need to load or
substitute an ink color, or run the print quality adjustment.
Action
Perform one of the following actions:
•
Enter the PQA START command to begin the print quality
adjustment.
•
Enter the SUBSTITUTE INK command.
•
Abort the report or job.
9-54
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE