Xerox 4850 HighLight Color Скачать руководство пользователя страница 136

Страница: 136 / 280

OPERATING SYSTEM SOFTWARE (OSS) MESSAGES

— Recreate the job using the correct tape labels.

OS6050

Host requested job abort. Job terminated.

The HIP job was aborted at the host. The system canceled the
job.

Action

None.

OS6052

HIP recovered spool space, data loss . . . job cannot proceed

A system rollover occurred. Input cannot recover the current
HIP job because data is no longer available.

Action

Resend the job.

OS6080

LBLLB.SYS file not found

The label processing the library file does not exist on disk. The
job will abort.

Action

Perform one of the following actions:

•

Resysgen, if you are authorized to do so.

•

Contact your service representative.

OS6090

Label error : ILLEGAL BLOCK LENGTH; CONTINUE or ABORT?

When trying to read a tape label, the system could not find the
label part indicated in the message.

Action

Refer to the actions provided for messages OS6010 through
OS6042.

OS6101

RTEXT file not found

The file for the Routing Text statement specified in the JDE is not
on disk.

Action

1. Create an RTEXT statement as a new file on the system disk.
2. Restart the job.

OS6102

Disk read error - RTEXT file

The RTEXT statement is entered incorrectly in JDE. The system
cannot read it.

Action

1. Perform one of the following actions:

— Press <CON> to resume printing. The RTEXT message

will not print.

— Enter the ABORT job command to cancel the job.

2. Recode the RTEXT statement correctly.

3. Restart the job.

9-78

XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE

Содержание 4850 HighLight Color

























































































































































































































































































Результаты поиска

Содержание 4850 HighLight Color

Отзывы:

Xerox 4850 HighLight Color, Руководство по эксплуатации, Страница: 136 / 280

Результаты поиска

Содержание 4850 HighLight Color

Отзывы: