OPERATING SYSTEM SOFTWARE (OSS) MESSAGES
OS4900
System disk write protected: Reset write protect and n
The write-protect switch on the system disk drive is on. You
cannot change or delete files on the system disk.
Action
1. Move the write-protect switch on the system disk drive to
the OFF position.
2. Press <ENTER> or <RETURN>.
OS4990
System reliability log data being lost. Use ‘PROBLEM’.
The system error log that is resident on the disk is full. You can
resume output, but the system will no longer log errors. The
message, Output stopped--see message at CRT, appears on the
printer control console display.
Action
1. Enter the PROBLEM command to obtain the SAN code
numbers.
2. Contact your service representative.
OS4995
Use PROBLEM at earliest opportunity.
The system error log is almost full.
Action
Enter the PROBLEM command to avoid losing information in the
error log.
OS level 6: Job integrity problem messages
OS level 6 messages indicate a problem exists with the integrity
of the job and advise you of necessary actions to take.
OS6000
Insufficient memory for ‘ACCTINFO’; CONTINUE or ABORT?
The JSL specified the ACCTINFO option of the RSTACK
command. There is not enough dynamic memory for it.
Action
1. Perform one of the following actions:
— Enter the CONTINUE command or press <CON> to
print the job without delimiter sheets.
— Enter the ABORT job command to cancel the job.
2. Recreate the job, reducing the number of features.
OS6005
Invalid Ethernet tape preamble format.
Information in the Ethernet tape header (preamble) is missing or
incorrectly formatted. The job will not print.
Action
Recreate the job tape. Make sure the data is formatted correctly.
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
9-75
