manualshive.com logo in svg

Xerox 4850 HighLight Color, Руководство по эксплуатации, Страница: 226 / 280

Поделиться
Скачать
Xerox 4850 HighLight Color Скачать руководство пользователя страница 226

INTERPRESS (IP) ERROR MESSAGES

Invalid packed pixel array data.

During the decompression of a Xerox/Packed pixel array, the
format of the pixel array is determined to be invalid.

Action

None.

Feature not implemented:  printing instruction name.

The printing instruction name is not supported.

Action

None.

Font “Interpress font name” substituted for “Interpress font
name.”

The default font family was substituted for the requested font
family.

Action

None.

Further “. . . substituting point size DD . . .” messages
suppressed.

Many of the messages were logged and no further occurrences
were recorded.

Action

None.

ImageShift outside the range (-.25,+.25) in/(-.635,+.635) cm
not implemented.

A form cannot be shifted by adjusting the document coordinate
system, so the ImageShift printing instruction is limited by the
same constraints as the SHIFT JSL command.

Action

None.

Invalid packed pixel array data.

During the decompression of a Xerox/Packed pixel array, the
format of the pixel array was invalid.

Action

None.

Logo off paper on page n at nn.nnn, nn.nnn [inches]; nn.nnn,
nn.nnn [cm].

The logo exceeded the page boundary.  The coordinates
specified are from the lower left corner of a portrait page.

Action

Using the page coordinates in the error message, look at pagen
to determine the logo causing the problem and adjust the
position accordingly.  The logo may be entirely off the page and
not visible. 

18-6

XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE

Содержание 4850 HighLight Color

























































































































































































































































































Отзывы:

Нет отзывов