Xerox 4850 HighLight Color Скачать руководство пользователя страница 28

Страница: 28 / 280

GENERAL FLOPPY UTILITY (FLF) MESSAGES

FL1575

Skipping sector check

The system is not performing a sector check on this floppy disk.

Action

None.

FL1580

Floppy initialization complete

The system successfully initialized the floppy disk you specified.

Action

None.

FL2010

Unable to mount floppy

The system was unable to read the file directory on the floppy
disk.

Action

Make sure the floppy disk is formatted and initialized.

If the message appears again, the floppy disk may be unusable.

FL2020

Please load target floppy now

The system informed you to place the floppy disk to which you
want information copied in the drive.

Action

Place the floppy disk in the drive.

FL2025

Please load source floppy now

The system informed you to place the floppy disk from which
you want to copy in the drive.

Action

Place the floppy disk in the drive.

FL2030

Check floppy is inserted correctly and door is closed

The system detected that the floppy disk is not properly placed
in the drive.

Action

Make sure you properly place the floppy disk in the drive and try
the copying process again.

FL2055

This diskette is in an unknown format
Should formatting continue? (Y/N)

The system cannot recognize the format in which the floppy disk
was formatted.

Action

Perform one of the following actions:

•

Enter Y to format the floppy disk.

•

Enter N to cancel the operation.

5-6

XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE

Содержание 4850 HighLight Color

























































































































































































































































































Результаты поиска

Содержание 4850 HighLight Color

Отзывы:

Xerox 4850 HighLight Color, Руководство по эксплуатации, Страница: 28 / 280

Результаты поиска

Содержание 4850 HighLight Color

Отзывы: