SCALE COMMAND MESSAGES
**EDIM meta-code not supported**
The extended dimension (EDIM) function cannot be scaled to
600 spi.
Action
None.
Enter input file name or RETURN to exit
An input filename must be included in the command to invoke
SCALE.
Action
Perform one of the following actions:
•
Enter the input filename.
•
Press <RETURN> to exit this activity.
**Error n.n generating output file**
The system is unable to generate the output file.
Action
1. Check the SCALE command and reenter.
2. If the message reappears, contact your service representative.
**Error n.n reading input file**
There is a problem reading the input file. This is a disk error,
such as a bad block.
Action
1. Change the name of the input file to a well-known name (for
example, BADnnn.TMP).
2. Restore the file from a backup source (for example, tape,
floppy disk, or host).
3. Recreate the file using FDL, if it is an FRM file.
4. Contact your service representative to log the bad sector and
delete the well-known name.
**File already exists, overwrite name (yes or no)?**
The requested file already exists.
Action
Perform one of the following actions:
•
Enter YES if you want to overwrite the existing file.
•
Enter NO if you want to cancel the command.
**File name cannot be scaled (unknown error)**
The requested file cannot be scaled due to an unknown error.
Action
Contact your service representative.
14-2
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
