Xerox 4850 HighLight Color Скачать руководство пользователя страница 223

Страница: 223 / 280

INTERPRESS (IP) ERROR MESSAGES

Feature requires RIP option; graphic figures/lines.

You can only use graphic figures and lines when you select the
Raster Image Processor (RIP) option.

Action

None.

Feature requires RIP rounded line endings and nonmitered
joints.

Rounded line endings are supported only with the Raster Image
Processor (RIP) option.

Action

None.

Font problem; regarding n point (rotated n degrees) font
“Interpress font name”. . .

This is the general font problem message that precedes several
other messages and is issued when font problems are found
during text processing.

Action

None.

Form file not found: “file type file name.“

When processing an SIF, no file with the name filename.filetype
was locally available to the LPS.

Action

Load the form on the LPS or change the form reference in the
document and resend the document.

Further “No font for output character set. . .” messages
suppressed.

Many of these messages were issued, and no further occurrences
will be reported.

Action

None.

Imaging operator name available only with RIP option.

The identified imaging operator is implemented in conjunction
with the Raster Image Processor (RIP) option.

Action

1. Remove the object from the document that caused the error.
2. Resend the document.

Overlapping form copy ranges on one page.

Multiple forms per page were requested, and the LPS does not
have the Raster Image Processor (RIP) option.

Action

1. Merge the multiple forms into a single FSL.
2. Reference the new form file in the document.
3. Resend the document.

XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE

18-3

Содержание 4850 HighLight Color

























































































































































































































































































Результаты поиска

Содержание 4850 HighLight Color

Отзывы:

Xerox 4850 HighLight Color, Руководство по эксплуатации, Страница: 223 / 280

Результаты поиска

Содержание 4850 HighLight Color

Отзывы: