manualshive.com logo in svg

Xerox 4850 HighLight Color, Руководство по эксплуатации, Страница: 182 / 280

Поделиться
Скачать
Xerox 4850 HighLight Color Скачать руководство пользователя страница 182

PURGE (PG) COMMAND MESSAGES

PG0217

Purging HIP spool file

The system is removing unwanted data from the HIP spool file.

Action

None.  

PG0300

Processing the entire disk except the print file

You entered the PURGE F command.  The system is clearing all
unused areas of the disk except the print file.

Action

None.  

PG0310

Purging the following disks (excluding print files):

The system  is clearing the listed system disk drives except for
any applicable print files.

Action

None.  

PG1010

Purge processor active

You entered a PURGE command while purge was already in
progress.  The command is ignored.

Action

None.  

PG1800

Purge processor aborting

You entered the ABORT command, and the purge process is
being terminated.

Action

None.  

11-2

XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE

Содержание 4850 HighLight Color

























































































































































































































































































Отзывы:

Нет отзывов