HOST INTERFACE PROCESSOR (HIP) MESSAGES
HP2200
Rejected non-print file transfer.
This message appears under either of these conditions:
•
The HIP is not accepting nonprint jobs and the host tried to
send one.
•
The HIP is accepting nonprint files, but the host tried to send
one with a file type not specified in the HIP.LIB file.
Action
Modify the HIP.LIB ACCEPT entry, enter the HIP ONLINE ALL
command, or both.
HP2210
File SEND not allowed.
You entered a HIP SEND command, but you are either logged on
at level 1 or you are online to a host that does not support file
transfers initiated by the printer.
Action
Determine the cause of the error. Correct the error and retry the
command.
HP2220
File specified to SEND does not exist.
The file you tried to send does not exist.
Action
Verify that the filename is correct and retry the command.
HP2240
SEND request rejected by queue saturation.
You entered the HIP SEND command when the job queue was
full.
Action
Wait until jobs print, then reenter the HIP SEND command.
HP2290
Pass-through pending, enter ’HIP START’.
HIP was not started when a pass-through job was sent from the
XPAF host.
Action
Enter the HIP START command.
HP2300
Error in command at: ’part of command in error’.
You entered part of the command incorrectly.
Action
Reenter the command correctly.
HP2310
Reenter command.
The system displays this message immediately after message
HP2300.
Action
Reenter the command correctly.
XEROX 4850/4890 HIGHLIGHT COLOR LPS MESSAGE GUIDE
7-11
