Xerox 460, Инструкция по установке и устранению неисправностей

Страница: 47 / 210

Xerox Document Centre Network Installation & Troubleshooting Guide Page 5 - 1
Novell
NetW
ar
e 4.X
and 5.X
(NDS)
Nov
ell NetWare 4.X and
5.X (NDS) N
etw
orks
Novell NetWare 4.X and 5.X (NDS)
Networks
Before You Start
NOTE: Your Document Centre may be installed on your network using
Novell NDPS. The Xerox NDPS Agent, Documentation, and Print
drivers are available from the Xerox Web Site www.xerox.com
To enable 100BaseT or a Token Ring interface, refer to
Chapter 2
How to Connect to Ethernet or Token Ring
Networks to configure the Speed and Source Routing settings
for your environment.
The CentreWare software supplied with your printer can be
used to set up your printer on your Novell network. For details
refer to the document entitled
CentreWare Network Services
Guide .
This procedure assumes you ran NWADMIN or PCONSOLE
to set up a print server object. Please refer to the
documentation supplied by Novell to complete those tasks.
Record precisely (observe upper and lower case, dot notation
etc.) the following: the
NDS Tree , NDS Context Name ,
frame type , Print Server Name , and the Print Server
password, that was assigned.
Additionally, you must set NCP packet signature option to
0 , 1 , or 2 (3 is not supported), AND set Reply to get nearest
server to ON for at least one file server that is on the same
segment as the printer.