Xerox 460, Инструкция по установке и устранению неисправностей

Страница: 201 / 210

Xerox Document Centre Network Installation & Troubleshooting Guide Page 21 - 5
Por
t 91
00 P
rint
ing
Port
9100 Print
ing
6. Set the Subnet Mask and Gateway.
a) Press the Subnet and Gateway button.
b) Press the soft buttons on the Touch Screen one at a time
for each octet of the Subnet Mask and enter the numbers
using the keypad. Repeat this process for the IP Gateway
address. When finished press
Save to record the changes
and exit to the TCP/IP Settings screen.
NOTE: The Broadcast Address will be calculated automatically.
7. Enable Port 9100 printing .
a) Press the Port 9100 printing button.
b) At the next screen press Enable then press Save .
8. Enable HTTP/IPP protocol.
a) Press the HTTP/IPP button.
b) At the next screen press Enable .
c) Press Save .
9. Exit the Tools Menu
a) Press the Exit Tools button.