Xerox 460, Инструкция по установке и устранению неисправностей

Страница: 76 / 210

Page 9 - 6 Xerox Document Centre Network Installation & Troubleshooting Guide
Go to the workstation and...
1. Verify that the TCP/IP protocol stack is loaded.
2. Use the CentreWare Network Services CD-ROM to install
print drivers. Details for this are found in the document sup-
plied with your printer entitled
CentreWare Network Ser-
vices Guide .
Windows 95/98, Windows NT 4.X Workstation and
Windows 2000 Users
• Add a network printer as you normally would.
• Borwse for and Double-click the name of the WorkGroup for
the printer as shown on the Configuration Report .
• Double-click the NetBIOS Host Name of the printer as shown
on the Configuration Report .
• Click once on the Printer Name as shown on the Configura-
tion Report then click OK .
• For a new printer you wil be prompted for a print driver. Select
Have Disk and browse to the directory with the Document
Centre driver, select it then click OK .
3. Open an application and print a test page to verify operation.
4. If your print job does not print, refer to the Troubleshooting
section of this document to solve the problem.
5. Check your test job for quality and use the Problem Solving
section of the
Document Centre Reference Guide for
resolving print defects.
6. Repeat this Go to the workstation and... procedure for each
workstation on the network that will print to the printer.