Xerox 460, Инструкция по установке и устранению неисправностей

Страница: 85 / 210

Xerox Document Centre Network Installation & Troubleshooting Guide Page 11 - 3
Mi
cros
oft W
ind
ow
s
NT 4.X
Ser
ver
M
ic
rosof
t Wind
ows NT
4.X S
erv
er Ne
tw
ork
5. Set the Host Name
a) Press the Name/Address button.
b) One at a time press the soft buttons on the Touch Screen
for each Octet of the IP address and enter the numbers
from the keypad.
c) Press the Host Name button.
d) When the soft keypad appears, type the host name
EXACTLY as you want it to appear with proper case.
When finished press the
Save button to record the
changes and exit to the TCP/IP Settings Screen.
6. Set the Subnet Mask and Gateway
a) Press the Subnet and Gateway button.
b) One at a time press the soft buttons on the Touch Screen
for each octet of the Subnet Mask and enter the numbers
from the keypad. Repeat this process for the IP Gateway
address. When finished press
Save to record the changes
and exit to the TCP/IP Settings Screen.
NOTE: The Broadcast Address will be calculated automatically.
c) Press the TCP/IP - Line Printer button. At the next
screen press Enable then press Save .
NOTE: While you can change the port number at which your Document
Centre will accept lpr print jobs it is recommended that you do this
ONLY with extreme caution as most lpr spoolers are set to send
print jobs to the default port.
d) If you wish to change the lpr port for your printer press
the port soft button and enter the desired port number at
the keypad. Press
Save .