Xerox 460, Инструкция по установке и устранению неисправностей

Страница: 153 / 210

Xerox Document Centre Network Installation & Troubleshooting Guide Page 20 - 3
Scan Set
up
w
it
h
out
Cent
re
Wa
re
Scan S
etup w
ithou
t
C
en
tre
W
a
re
Who Should Use This Guide
This chapter is a companion to the Network Scanning Services
Guide and is intended to be used by System Administrators who are
setting up network scanning without using CentreWare Network
Scanning Services. CentreWare Network Scanning Services is
intended for use on Windows based workstations.
There are two other options for setting up scanning services:
• Setting up Native Scanning
• Setting up Scanning Using CentreWare Internet Services
Both of these set up options require the use of procedures in this
guide. For Setting up Scanning Using CentreWare Internet
Services, you will need to complete some processes here, and then
refer to the
Internet Services Guide to complete the set up. All of
the procedures for setting up Native Scanning are included here.
Whether you are setting up Native Scanning or Scanning Using
CentreWare Internet Services, there are two options for file transfer.
They are:
• Setting Up Scanning - NetWare (NCP)
• Setting Up Scanning - FTP (File Transfer Protocol)
Procedures for both of these file transfer options are contained in
this guide.
NOTE If you will be using Xerox’s CentreWare Network Scanning
Services to set up scanning on the Document Centre, refer to the
Network Scanning Services Guide guide now.
To use the procedures in this guide effectively, you must have
experience working in a network environment. You must also have
access to the network and possess Supervisor (Administrator) rights.
You may also require documentation provided by network and
client workstation vendors.