Xerox 460, Инструкция по установке и устранению неисправностей

Страница: 26 / 210

Page 2 - 4 Xerox Document Centre Network Installation & Troubleshooting Guide
How to set the Ring Speed and Source Routing
1. Enter the Tools pathway
a) Press the Access ( ) button.
b) On the keypad enter 1111 or the current password. Press
the Enter button when finished. Press the Go to Tools
button.
c) The Touch Screen will be used for the remainder of the
data entry.
2. Set or Change the Ring Speed or Source Routing.
a) Press the Connectivity and Network Setup button.
b) Press the Physical Media button.
c) Press the Token Ring button.
d) Press the Token Ring Settings button.
e) Select the desired Ring Speed ( 4 Megabits or 16 Mega-
bits per second).
f) Select the desired method of Source Routing ( Single
Route Broadcast or All Route Broadcast ).
g) When finished with your changes press Save .
3. Press the Exit Tools button.
4. Wait a MINIMUM of 7 minutes for the printer to reset.
a) Obtain a Configuration Report page from your printer
and verify that your Token Ring Settings have been
retained.
5. Connect your Document Centre to the network with the
appropriate cabling.