Xerox 460, Инструкция по установке и устранению неисправностей

Страница: 200 / 210

Page 21 - 4 Xerox Document Centre Network Installation & Troubleshooting Guide
4. Enable the network interface and protocol.
a) Press the TCP/IP Settings button.
b) Press the Protocol and Media button.
c) Press the Enable button. If Physical Media buttons
appear, select either Ethernet or Token Ring . Press
Save .
5. Set the Host Name.
a) Press the Name/Address button.
b) One at a time press the soft buttons on the Touch Screen
for each octet of the IP address and enter the numbers
using the keypad.
c) Press the
Host Name
button.
d) When the soft keypad appears, type the host name
EXACTLY as you want it to appear with correct case.
When finished press the
Save
button to record the
changes and exit to the
TCP/IP Settings
Screen.