Xerox 460, Инструкция по установке и устранению неисправностей

Страница: 53 / 210

Xerox Document Centre Network Installation & Troubleshooting Guide Page 6 - 1
Novell NetW
ar
e 3.1x
or
4.x
/5.
x
i
n
B
ind
er
y
Nove
ll
N
etWar
e 3.1x or
4.x/5.x in
Bin
d
er
y Mode
Novell NetWare 3.1x or 4.x/5.x in
Bindery Mode
Before you start
To enable 100BaseT or a Token Ring interface, refer to
Chapter 2
How to Connect to Ethernet or Token Ring
Networks section to configure the Ring Speed and
Source Routing settings for your environment.
The CentreWare software supplied with your printer can
be used to set up your printer on your Novell network.
For details refer to the document entitled
CentreWare
Network Services Guide. This procedure assumes you
ran PCONSOLE to set up a print server. Please refer to
the documentation supplied by Novell to complete this
task. Record precisely (observe upper and lower case,
punctuation etc.) the following: the
Primary Server
name, Frame type used , Print Server name, Print
Server password, and the Queue name assigned.
Additionally, you must set NCP packet signature
option to 0 , 1 , or 2 (3 is not supported), AND set Reply
to get nearest server to ON for at least one file server
that is on the same segment as the printer.