73
Freedom SW-RVC Installation Guide
NOTE
: All inverter specifications are at nominal conditions: 12
volts DC inverting 120 volts AC, unless otherwise specified.
Inverter Specifications
Output wave form
pure sine wave (true sine wave)
Output power (continuous)
3000 W (up to 40 °C)
Output power (5 seconds)
6000 W
Output current
24 A
Peak output current
80 A
Output frequency
60 Hz ± 0.2 Hz
Output voltage
120 VAC
AC output connection/s
Split phase in/dual out,
Dual in/dual out
Peak efficiency
90%
No-load current draw (Inverter
On)
<3 ADC
Standby current draw (Inverter
Off)
<0.25 ADC
Input DC voltage range
10–16 VDC
Low battery voltage shutdown cut-
off
10.5 V (selectable)
High battery voltage shutdown cut-
off
16.5 V (selectable)
NOTE
: All charging specifications are at nominal conditions:
ambient temperature of 77 °F (25 °C), 120 VAC, 60 Hz input,
unless otherwise specified.
Charger Specifications
Charging method
Three-stage charge (Bulk, Absorption,
Float)
Two-stage charge (Bulk, Absorption)
The default charging method is three-
stage.
Without a battery temperature
sensor
Three settings with the following
temperature values:
Cool 50 °F (10 °C), Warm 77 °F (25 °C),
Hot 104 °F (40 °C)
The default setting is Warm.
With a battery temperature sensor
(included)
The temperature compensation
coefficients are as follows:
Flooded: 27 mV × (25 °C – BTS °C)
Gel: 27 mV × (25 °C – BTS °C)
AGM: 21 mV × (25 °C – BTS °C))
Output current (maximum)
150 ADC
Output voltage
12 VDC
Output voltage range
5–16 VDC
Dead battery charge voltage
> 5 VDC
Equalization cycle
Automatic, Manual by RV-C system device
controller, if available
Optimal charging efficiency
> 85%
Содержание 815-3012-02
Страница 14: ...This page is intentionally left blank 2 ...
Страница 75: ...This page is intentionally left blank 2 ...