Xantrex 815-3012-02, Руководство пользователя

Страница: 18 / 76

Basic Installation Procedures
19 Freedom SW-RVC Installation Guide
Planning the Installation
This section provides information to help you plan for a basic
installation of the Freedom SW-RVC.
As your system configuration is determined, record the details in
Information About Your System on page 2 in this guide.
Two Key Performance Factors
Two key factors in particular will have a major impact on system
performance.
Size and Length of DC Cables
To select the appropriate size and length of DC cables, see DC
Components on page 26 .
The DC cables should be as short as possible and large enough to
handle the required current, in accordance with the electrical
codes or regulations applicable to your installation. If there are
long battery cables which are in excess of 10 feet (3.1 m) each
and not of sufficient size, the voltage drop across the cables will
have a negative impact on overall system performance.
Mounting Location of the Freedom SW-RVC
To choose an appropriate location for mounting the
inverter/charger, see
Step 1: Choosing a Location for the Unit on
page 30 .
Planning Preparations
AC, DC, and Network Components
For a successful installation, you need to plan for AC, DC, and
network components of the power system. The AC and DC
components are described in this section.
AC components include:
n
AC Input for Dual AC Line
n
AC Input for Single AC Line
n
AC Loads
n
AC Disconnect and Over-Current Protection Device
n
Distribution Panels
n
AC Wiring
n
AC Output Neutral Bonding
DC components include:
n
Batteries
n
DC Cabling
n
DC Disconnects and Over-Current Devices
n
DC Grounding
Network considerations include:
Detailed information on planning and installing your network is
available in the installation guide. Refer to the guide to determine
the type of network layout to install, as well as guidelines for
installing the network. This guide is available for download at
www.xantrex.com .