Basic Installation Procedures
47
Freedom SW-RVC Installation Guide
Figure 10 Connecting the BTS Cable to BTS Port
FREEDOM
SW
3012
Inve
rter
Reset Enable
Inve
rter
AC/
Enabled
Cha
rge
Fault
FREEDOM
SW
3012
Mounting to the Side of the Battery Case
To mount the sensor on the battery case:
Figure 11 BTS Mounted on the Battery Case
1. Select the battery to be monitored.
2. The BTS should be connected to the battery bank that is
directly connected to the inverter/charger.
3. Select a side suitable for attaching the sensor.
4. The surface where the sensor is to be mounted must be flat
and free from reinforcing ribs or other raised features. This
surface must be in direct internal contact with the battery
electrolyte. Do not install the sensor near the top of the
battery or on the battery’s top surface.
5. Clean the selected area thoroughly to remove any oil or
grease that could prevent the sensor from adhering to the
battery case. Allow the battery case to dry thoroughly.
Содержание 815-3012-02
Страница 14: ...This page is intentionally left blank 2 ...
Страница 75: ...This page is intentionally left blank 2 ...