Xante Colour ScreenWriter, Руководство пользователя

Страница: 193 / 446

_______________________________________ Configuration 6-7
To perform a level 2 reset, turn off the printer; next, press and hold
down the Online and Duplex keys while you turn on the printer. Release
the keys after
RESET 2
appears in the window. The display will read
initializing and then go through the normal start-up sequence.
Menu Structure
Configuration menus allow you to configure many printer feature
defaults and the printer interfaces. The main configuration menu
groups are the Graphics, Interface (I/F), Media, Utility, and
Maintenance menus (fig. 6.2).
Use the Graphics menus to set options related to graphic attributes
such as lines per inch and the color mode. Use Interface menus to set
the printer’s serial, parallel, LocalTalk, and Ethernet interface
defaults. Use the Media menu to select the media type. Use Utility
menus to set printer feature defaults and to print miscellaneous utility
pages. Use Maintenance menus to notify the printer that an engine
service condition has been cleared.
* Calibrates all trays
SETUP
I/F
DHCP
ETHERTALK
IP ADDRESS
LINEPRINTER
LOCALTALK
NOVELL PRNTSRV
PARALLEL
RS232
*
Only with IDE drive
and RAM Disk enabled
SETUP
MEDIA
MEDIA TYPE
ENVELOPE ACCELAFONT*
JOB TIMEOUT
LANGUAGE
LASER POWER
POWER SAVE
RAM DISK
STARTUP PAGE
TRAY SWITCH
UTILITY PAGES
SETUP
UTILITY
READY/IDLE
SETUP
GRAPHICS
COLOUR MODE
COLOUR OUTPUT
COLOUR PROFILE
DPI
LPI
REGISTRATION
SPOT FUNCTION
UCR
XACT
*
SETUP
MAINTENANCE
REPLACED ITEM
Fig. 6.2 Main Menus