Xante Colour ScreenWriter, Руководство пользователя

Страница: 153 / 446

___________________________________________ PC Setup 4-49
• To move the -x line toward the page’s edge, move the slide
on the vertical slide bar down (toward the +y).
6. Measure the distance from the edge of the page to the -y line.
This distance is dependent on the x coordinate.
• To move the -y line away from the page’s edge, move the
horizontal slide bar to the left (toward the -x).
• To move the -y line toward the page’s edge, move the
horizontal slide bar to the right (toward the +x).
7. Click Update/Print; then, click OK in the Alignment message
box to print another alignment page.
8. Measure the -x and -y lines on the new test page. If the lines
are not 1" (25.4 mm) from the page’s edge, go back to step 4
and repeat the process.
9. When the -x and -y lines are set correctly, click Close. Then,
select File: Exit. Command Center closes.
Managing Fonts on an Optional Hard Disk
Fonts downloaded to your printer are considered resident, which
means applications do not have to bundle these fonts with print jobs.
You can download additional fonts to the printer’s memory or to an
optional hard disk. Fonts downloaded to printer memory remain only
through the current power cycle. Fonts downloaded to an optional
hard disk survive a power cycle.
Caution: Large fonts or a large number of fonts downloaded to
memory may cause PostScript errors due to insufficient
memory. To solve this, download the fonts to the printer’s
hard disk (if available) or increase printer memory.
To remove all downloaded fonts from printer memory, turn the
printer off and then back on.