Xante Colour ScreenWriter, Руководство пользователя

Страница: 130 / 446

4-26 PC Setup bb __________________________________________
Note: You also can copy this file from the MS-DOS
command prompt window by typing the following
command, substituting the drive letter containing the
XANTÉ Utilities CD-ROM for [Drive].
COPY [Drive]:\PDFS\XTCSW_6.PDF C:\XPRESS\PDF
↵
See the QuarkXPress section in the appendix for additional
information.
PS_Files Folder
This folder contains Adobe PostScript files to help setup and
maintain your printer and a PDF file, Overview.pdf, which describes
these files.
Use Command Center’s Send PostScript File option to download
these files to your printer (see “XANTÉ Command Center” later in
this chapter) or type the following DOS command, substituting the
desired file’s name for filename and a different port, if necessary:
COPY FILENAME.PS LPT1
↵
D.ps contains a Control-D (PostScript’s end-of-job marker) for use
with applications that do not send a PostScript end-of-file.
Fonts.ps3 prints a list of Adobe PostScript 3 fonts resident on
XANTÉ PostScript 3 printers.
Fontsamp.ps3 prints samples of Adobe PostScript 3 fonts resident
on XANTÉ PostScript 3 printers.
Ftp.ps prints instructions for uploading from and downloading files
to XANTÉ’s FTP (File Transfer Protocol) site.
Initdsk.ps file is used to initialize hard disks attached to or installed
in your printer.