Wood master Flex Fuel Скачать руководство пользователя страница 44

Страница: 44 / 76

Flex Fuel Owner’s Manual

March 2011

Before filling, it is recommended that the buffer temperatures are checked. If the existing temperature is

already sufficient, furnace filling is not recommended, rather the furnace should be allowed to burn out.

When filling is not necessary

(Smoldering gas extraction is activated by the system operator)

This instruction is displayed if the system operator wants to activate smoldering gas extraction and the

furnace is currently in part load mode. Currently sufficient demand is not guaranteed, the furnace is

already being operated at reduced power. Only add more fuel if there is sufficient demand. If this is not

the case, it is recommended that adding fuel is not carried out and the furnace is allowed to burn out.

When filling not is necessary

(Smoldering gas extraction is activated by the system operator)

This instruction is displayed if the system operator wants to activate smoldering gas extraction and the

furnace has already run for a long time since the heat exchangers were cleaned. Only add fuel if more

heat is required. If this is not the case, please let the furnace burn out, so that automatic heat exchanger

cleaning can be carried out.

Upon completion of the burn-off

This instruction is displayed if the burn-off has ended and the furnace was already being operated in part

load mode. This instruction provides information to the system operator. At the end of the last burn-off

the furnace had little demand and had to be operated with reduced power. Ensure that at the next firing

there is sufficient demand.

11: Bulk Materials Mode

NOTE!

The boiler is already

controlled in “Part Load”

Sufficent demand is not

guaranteed! Filling the

boiler is only recommended if

sufficent demand is assured!

Do you still wish to add more?

NOTE!

The boiler has already run

for a lengthy period since the

last time the heat exchangers

were cleaned! It is

recommended to let the boiler

cool down so that cleaning can

be carried out!
Do you still wish to add more?

NOTE!

The boiler was already being

controlled in “Part Load”

during the last burn-off. The

demand was insufficient

Please ensure for the next

firing that there is

sufficent demand!

Содержание Flex Fuel













































































Результаты поиска

Содержание Flex Fuel

Отзывы:

Похожие инструкции для Flex Fuel

Бренды по названию

Популярные бренды

Wood master Flex Fuel, Руководство пользователя

Результаты поиска

Содержание Flex Fuel

Отзывы:

Похожие инструкции для Flex Fuel

Бренды по названию

Популярные бренды