Wohler AMP1-16V-MD, Руководство пользователя

Страница: 92 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h n o l o g i e s , In c . A l l r i g h t s r e s e r ve d .
84
Ch a p t e r 6 M en u L i st
M o ni t o r M i x er Co n fi g ur a t i o n M e n u
• Lower Display Color : Rotating the Balance knob after pressing
this button cycles the lower color of the displayed sample level
meter color through a wide variety of colors.
Monitor Mixer Configuration Menu
Figure 6–15 Monitor Mixer Configuration Menu
This menu allows you to control the channels to be monitored, how
each channel is monitored, and the phase displays for each channel. At
the top of each channel, the cluster to which it belongs is displayed.
Channels may also be visible without having to be audible but the
reverse is not true.
•
Select Monitor Pair:
Pressing this control and then rotating the
Balance knob moves the red selection box from side to side,
selecting the channel pair to configure. Note that the eight pairs (16
channels) will scroll on and off the screen as you rotate the knob.
• Monitor Channel Trim: Pressing this control selects the left, the
right, or both volume controls in the selected pair. Selection is
indicated by the blinking handle. Rotating the Balance knob
changes the gain. The change is indicated both graphically and
numerically.
Pressing the
Balance
control knob returns the channel to unity
gain. This control has a range of -60 dB to +12 dB (inclusive) in one
dB steps.
Monitor Mixer Configuration Menu
160 mS
Audio Delay
Monitor Pair 1
Stereo Pair 1
SDI In
Pair 1
+0 +0
Monitor Pair 2Chan 3
Stereo Pair 2
AES In
Pair 4
+0 +0
R L R L R L R L
Speaker Assign
Monitor Channel
Trim
Select Monitor Pair
Select Source Pair
Phase LED On/Off Mute Speakers
w/ Headphone Always
USO
RESTRITO