Wohler AMP1-16V-MD, Руководство пользователя

Страница: 78 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h n o l o g i e s , In c . A l l r i g h t s r e s e r ve d .
70
Ch a p t e r 6 M en u L i st
A na l o g O u t p ut C o nf i g u r a t i o n M e nu
Analog Output Configuration Menu
Figure 6–4 Analog Output Configuration Menu
(Selected Sources)
Figure 6–5 Analog Output Configuration Menu
(Monitor Channels)
• Analog Output: This button will either be labeled
Analog Output
= Selected Sources
or
Analog Output = Monitor Channels
as shown in the two figures above. Pressing this button highlights it.
Subsequent presses toggle between its two choices. If the
Analog
Output = Selected Sources
is chosen, the
Balance
knob can
then be rotated to select no source (
None
) or the SDI or AES pair
assigned as a source. In a unit with Dolby enabled, the five decoded
output pairs are added.
• Affected by Solos & Mutes: This option is only available when the
analog output is set to monitor channels. When it is not available, it
is disabled and the options are set to
No
. When it is available, it
determines whether the
Main Screen Solo
and
Mute
buttons will
Analog Output Configuration Menu
Analog Out Channels 5/6 Analog Out Channels 7/8
+0 +0 +0 +0
Level Trim
Affected by
Volume Control
Affected by
Solos & Mutes
Output Mute
With Headphone
Analog Output =
Selected Sources
No
No
No
No
Yes
6 5 6 5 8 7 8 7
Channel Output
SDI In Channels 3/4 SDI In Channels 7/8
Analog Channel
Pair
Analog Output Configuration Menu
Analog Out Channels 5/6 Analog Out Channels 7/8
+0 +0 +0 +0
Level Trim
Affected by
Volume Control
Affected by
Solos & Mutes
Output Mute
With Headphone
Channel Output
No
Yes
Yes
Yes
Yes
Analog Output =
Monitor Channels
6 5 6 5 8 7 8 7
SDI In Channels 3/4 SDI In Channels 7/8
USO
RESTRITO