Wohler AMP1-16V-MD, Руководство пользователя

Страница: 62 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h n o l o g i e s , In c . A l l r i g h t s r e s e r ve d .
54
Ch a p t e r 5 E ff ic i en c y E nh a n c e m e nt s
P r e se t s
Clearing a Preset
1. From the
Configuration Selection Menu
, press the
Preset
Management key to display the Preset Configuration Menu .
2. Press the
Clear Preset
button.
3. Rotate the Balance knob to highlight the preset you want to clear.
4. Press the Balance knob to select the preset.
2. Press the Select button to initiate the Balance knob for character
selection.
3. Rotate the Balance knob until the M is highlighted.
4. Press the
Balance
knob to select the character.
5. Press the Shift button to display the lower case character set.
6. Note that you do not need to press the Select button a second
time; simply rotate the Balance knob until the y is highlighted.
7. Press the Balance button to select it.
Repeat this process for each character of the label. Note that the
space bar character is immediately to the right of the
9 . To correct
mistakes, press the Backspace button.
8. To save the new label and return to the Preset Configuration
Menu , press the button.
9. To verify your changes, look at the text to the right of the
Rename Preset button. Your preset should still be in the display
area with its new name.
Important:
The monitor will display a warning message to let you know that you
are about to clear the preset. You must respond by pressing the
Clear
Preset button again before the warning disappears (approximately
five seconds) or you must start over by pressing the
Clear Preset
button again.
USO
RESTRITO