Wohler AMP1-16V-MD, Руководство пользователя

Страница: 83 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h no lo g i e s , I n c . A l l r i g h t s r e s e r ved .
75
C ha p t e r 6 Menu List
H a r d wa r e Co nf i g u r a t i o n M e nu
•
Automatic
: When this option is selected, the Dolby Decoder
will automatically detect and decode Dolby E or Dolby
Digital signals, and will pass PCM signals.
•
Dolby E or Mute
: Selecting this option mutes the Dolby
decoder outputs in the absence of a Dolby E bitstream.
• Dolby Digital or Mute : Selecting this option mutes the
Dolby decoder outputs in the absence of the Dolby Digital
bitstream.
Hardware Configuration Menu
Figure 6–9 Hardware Configuration Menu
•
Screen Saver:
Pressing this button and then rotating the
Balance
knob allows the user to select from any of the delay times before the
screen saver engages:
• Minutes: 5 minutes to 119 minutes
• Hours: 2 hours to 24 hours
• Analog Reference Level: Pressing this button and then rotating the
Balance knob allows the user to select from any of the following
eight analog I/O reference levels:
• -22 dBFS = +4 dBu
Note:
In this mode, if the signal is externally switched
from a PCM signal to a Dolby-encoded signal,
there will be a short burst of noise while the Dolby
card detects the new type of signal.
Hardware Configuration Menu
AES 75 ohm Term
System Reset
1 2 3 4 5 6 7 8 AES Terminate All
Unit Info
SW Upgrades
-20 dBFS = 0 dBu
Analog Reference
Level
2 hrs Screen Saver
22 22 22
Left Middle Right
Screen
Bright
USO
RESTRITO