Wohler AMP1-16V-MD, Руководство пользователя

Страница: 84 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h n o l o g i e s , In c . A l l r i g h t s r e s e r ve d .
76
Ch a p t e r 6 M en u L i st
H a r d w a r e C o n fi g ur a t i o n M en u
• -20 dBFS = +4 dBu
• -18 dBFS = +4 dBu
• -16 dBFS = +4 dBu
• -20 dBFS = +8 dBu
• -20 dBFS = 0 dBu
• -18 dBFS = 0 dBu
• -9 dBFS = +6 dBu
• AES 75 ohm Termination: Pressing this button and then rotating the
Balance knob allows the user to select from any of the eight AES
channel pairs shown. Pushing the Balance knob control activates or
deactivates the internal 75 ohm termination on each AES input.
•
System Reset:
Pressing this button allows the user to reset all of the
presets and hardware option to the factory standard settings. Before
taking effect, a a yellow warning diamond appears with a
countdown. If the
Balance
knob is not pressed again within five
seconds, the request will be canceled. Otherwise, if you press the
Balance knob within the time-out window, all user presets and
other user-configurable settings (such as the unit's Ethernet IP
address and mask) will be set to a default state. The unit will then
reset, and the default settings will take effect.
• Screen Brightness : This control allows you to adjust the brightness
of each screen individually. Select which screen by repeatedly
pressing the button. Turn the
Balance
knob to adjust the
brightness. Note that, as with all displays, dimmer settings will
result in a longer display life.
•
Unit Info SW Update:
Displays a menu that displays the software
version numbers.
•
AES Terminate All:
When pressed, all of the internal 75 ohm AES
terminations are activated or deactivated at once.
WARNING!
Pressing this button will erase all of your existing presets. Use with
caution.
USO
RESTRITO