Wohler AMP1-16V-MD, Руководство пользователя

Страница: 122 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h n o l o g i e s , In c . A l l r i g h t s r e s e r ve d .
114
A p p en d ix 9 E s t a b li s h in g C o nn ec t i v i t y
Co n ne c t i v i t y O p t i o ns
Connectivity Options
The fastest and simplest way to establish connectivity to your
AMP1-16V-MD Series monitor is through a LAN (local area network)
that includes a DHCP server, which will provide Ethernet settings for
both the host computer and the AMP1-16V automatically. The
alternative is to set up a direct connection between the host computer
and the unit through a crossover cable.
Connecting to a LAN
Launching the Setup Tool
1. Connect the unit and your host PC to a LAN (local-area network)
using standard Ethernet patch cables.
2. Run the
NetBurner IP Setup Tool
.
3. You should see something similar to the dialog shown in Figure 9–1
below. This dialog shows a NetBurner module fresh from the Wohler
factory.
Decision Point:
The following section describes connecting through a LAN. If you
wish to connect directly, please skip to
Connecting Directly on page
117 .
USO
RESTRITO