Wohler AMP1-16V-MD, Руководство пользователя

Страница: 100 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h n o l o g i e s , In c . A l l r i g h t s r e s e r ve d .
92
Ch a p t e r 6 M en u L i st
U ni t I n fo r m a t i o n M e n u
Figure 6–21 Unit Information Menu - Ethernet and
Serial Port Configuration
• ENABLE FTP: This button label only appears when the
S/W Update
menu is selected, as in Figure 6–22 . It is used as part
of the software update procedure.
• S/W Update: Press this button to begin the software update process.
Instructions then appear on the screen as follows:
Figure 6–22 Unit Information Menu - Software
Update Instructions
Unit S/W Info
S/W Update
Ethernet Port Configuration
IP Address: 0.0.0.0
MAC Address: 00:03:f4:02:97:55
Serial (RS-232) Port Configuration
Baud Rate: 115200
Parity: None
Data Bits: 8
Stop Bits: 1
Handshaking: None
Network Mask: 0.0.0.0
Gateway: 0.0.0.0
DNS: 0.0.0.0 Serial/
Ethernet Info
Unit Information Menu
Unit S/W Info
Serial /
Ethernet Info
ENABLE FTP
Software Update Instructions
ftp://0.0.0.0/
See also the instructions sent with the software
update package provided by Wohler .
Now, press ENABLE FTP to enable the internal
FTP server, or press any other screen control
to cancel.
Once software updates are enabled , this screen
will go blank. Unplug and then re-power the unit
to halt the FTP server and cause it to restart .
Unit S/W Info
Unit Information Menu
USO
RESTRITO