Wohler AMP1-16V-MD, Руководство пользователя

Страница: 126 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h n o l o g i e s , In c . A l l r i g h t s r e s e r ve d .
118
A p p en d ix 9 E s t a b li s h in g C o nn ec t i v i t y
Co n ne c t i n g D i re c t ly
3. Once the AMP1-16V has restarted, please remove the power cord
once again.
4. Connect the crossover Ethernet cable directly between the
computer’s Ethernet port and the AMP1-16V’s Ethernet port. The
Ethernet jack is labeled as “CMD NET” on the back of the AMP1-
16V.
5. Apply power to the AMP1-16V, and let it fully boot.
6. Apply power to the PC and allow it to fully boot.
7. Your computer should have a network icon in the system tray that
indicates the state of the network connection. These icons mean the
computer is trying to establish a connection.
· Windows XP:
· Windows 7:
8. You must wait until the connection is established. This happens
when the icon changes to one of these two:
· Windows XP:
· Windows 7:
9. The exclamation point on the icon simply signifies that the
computer is not connected to the internet, which should be true if
this adapter is connected directly to the unit.
10. Run the IP Setup Utility .
11. You should see the AMP1-16V appear with a 169.254.xxx.xxx
address. The last two octets are randomly generated, and mutually
agreed upon by the PC and the unit. If the unit appears in the
Select a Unit window, your connection is successful.
USO
RESTRITO