Wohler AMP1-16V-MD, Руководство пользователя

Страница: 21 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h no lo g i e s , I n c . A l l r i g h t s r e s e r ved .
13
C h a p t er 2 The “How Do I...” Chapter
F re q u e nt ly A s k ed Q u es t i o ns
Frequently Asked Questions
For all of the following instructions,
Active Help
displays on the left
screen.
How do I Select the Inputs I Want to Hear in the
Speakers?
The AMP1-16V-MD offers a wide variety of inputs. You many monitor
any 16 of the input channels, in any mix, on the meters and through the
speakers. Assigning inputs to be monitored is done in the
Monitor
Mixer Configuration Menu
:
1. Press the
Select Monitor Pair
control and then turn the
Balance
knob to select the channel pair on which you want the input to be
monitored. Note that the channel pairs scroll right and left as you
turn the
Balance
knob so that you can select any one of the eight
channel pairs.
2. Press the
Select Source Pair
control and then turn the
Balance
knob to select the input. Refer to the
AES In Pair 1
in Figure 2–2
below.
Figure 2–2 Monitor Mixer Configuration Menu
3. Repeat Steps 1 and 2 for each input to be monitored.
Configuration Selection
Menu
Main Screen
Monitor Menu
Monitor Mixer
Configuration Menu
 Menu
Monitor Mixer Configuration Menu
160 mS
Audio Delay
Monitor Pair 1
Pair 1
AES In Pair 1
+0 +0
Monitor Pair 2
Pair 2
SDI In Pair 2
+0 +0
R L R L R L R L
Speaker Assign
Monitor Channel
Trim
Select Monitor Pair
Select Source Pair
Phase LED On/Off Mute Speakers
w/ Headphone Always
USO
RESTRITO