Wohler AMP1-16V-MD, Руководство пользователя

Страница: 33 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h no lo g i e s , I n c . A l l r i g h t s r e s e r ved .
25
C h a p t er 2 The “How Do I...” Chapter
F re q u e nt ly A s k ed Q u es t i o ns
How Do I Use Presets to Change Inputs?
The AMP1-16V-MD has more inputs than can be monitored on a 16-
channel screen. The AMP1-16V-MD has the ability to store eight entire
system configurations as presets, including the inputs that are being
monitored. Any of these presets can be instantly recalled from the
Main
Screen
as needed.
Suppose you need to monitor an SDI stream sometimes, but other times
you need to monitor just some of those SDI channels along with some
AES or analog channels. You could set up one preset configuration to
monitor purely the SDI stream channels, and another to monitor the
mix of channels you sometimes need. If there are other input sources
you sometimes need to monitor, you could set up preset system
configurations for each scenario, up to a total of eight presets.
Using the other menus, first set up all of the parameters that are to be
part of the preset. Then use the
Preset Management Menu :
1. Press the
Save Current Configuration
button and then turn the
Balance
knob to select the number (1 to 8) of the preset you
would like to save the current configuration into. Then press the
Balance
knob.
Figure 2–12 Monitor Mixer Configuration Menu
Configuration Selection
Menu
Main Screen
Menu
Preset Management
Menu
Preset Mgmt Menu
Monitor Mixer Configuration Menu
160 mS
Audio Delay
Monitor Pair 1
Pair 1
AES In Pair 1
+0 +0
Monitor Pair 2Chan 3
Pair 2
SDI In Pair 2
+0 +0
R L R L R L R L
Speaker Assign
Monitor Channel
Trim
Select Monitor Pair
Select Source Pair
Phase LED On/Off Mute Speakers
w/ Headphone Always
USO
RESTRITO