Wohler AMP1-16V-MD, Руководство пользователя

Страница: 23 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h no lo g i e s , I n c . A l l r i g h t s r e s e r ved .
15
C h a p t er 2 The “How Do I...” Chapter
F re q u e nt ly A s k ed Q u es t i o ns
How do I Decode and Monitor a Dolby Bitstream
(Continued)?
Now that you have connected a Dolby bitstream source to the Dolby
decoder, you need to connect the outputs of the Dolby decoder to the
metering channels you will be monitoring the audio on.
This step involves configuring the Monitor Mixer Configuration
Menu
:
1. Press the
Select Monitor Pair
control and then turn the
Balance
knob to select the channel pair that you want the first decoded
Dolby pair to reside on. Note that the channel pairs scroll right and
left as you turn the
Balance
knob so that you can select any one of
the eight channel pairs.
2. Press the
Select Source Pair
control and then turn the
Balance
knob to select the decoded Dolby pair, as shown outlined in a red
box below.
Figure 2–4 Monitor Mixer Configuration Menu
3. Repeat Steps 1 and 2 for each decoded pair.
Configuration Selection
Menu
Main Screen
Monitor Menu
Monitor Mixer
Configuration Menu

Menu
Monitor Mixer Configuration Menu
160 mS
Audio Delay
Monitor Pair 1
Pair 1
Dolby Decoder Pair 1
+0 +0
Monitor Pair 2
Pair 2
SDI In Pair 2
+0 +0
R L R L R L R L
Speaker Assign
Monitor Channel
Trim
Select Monitor Pair
Select Source Pair
Phase LED On/Off Mute Speakers
w/ Headphone Always
USO
RESTRITO