53
The gas consumption display is deactivated
if in the 1st step the "Crossed out cartridge"
symbol is selected (factory default setting).
The burning time of the cartridge or the
cartridge pressure depends on the tempe-
rature. Very low indoor temperatures give
rise to a small flame if the device is used for
long periods, since the pressure inside the
cartridge drops. Overall this results an increase of the cartridge burning time.
i
Consumption display during
operation
Fig. 4.2/2
i
4.2.1 Reminder of gas consumption
If the adjusted cartridge burning time has expired,
a reminder appears on the display at the same time
as the opportunity is given to reset the burning time
in order to adapt it to the real time remaining.
If necessary, change the burning time and confirm
with a short push on the function knob (1). The
cartridge burning time is now reset to the new value.
The reminder occurs only after the previously
set cartridge burning time has expired and the next time the flame is extinguished,
i.e.: current use of the burner is not interrupted by the reminder. This may lead to
inaccurate times in the event of long burning times.
i
Reminder display
Fig. 4.2.1/1
Adjust reminder time if necessary
4.2.2 Resetting the gas consumption display
The gas consumption display can also be reset if the cartridge burning time has still not
expired completely. To do this, simply follow the steps for the gas consumption display
function again (see paragraph 4.2).
By confirming again the kind of cartridge and cartridge burning time, the cartridge
burning time which has expired up to now is reset.
If necessary, change the cartridge burning time to achieve higher accuracy.
i
5. Settings
The settings menu is intended to personalise
extended functions and safety devices such
as the DoubleClick IR-Sensor or Burner Head
Control (BHC). The settings depend on the user
and can be adjusted separately for both user
accounts (see paragraph 2.2). To access the
settings menu, select the settings symbol and
confirm with a short push on the function knob (1).
The wrench in the top left corner indicates that you
are in the settings menu.
Wrench
Settings menu
Fig. 5/1
Small arrows
EN
