49
3.3 Sensor Start-Stop
The flame is ignited by passing your hand
over the IR-Sensor (5). Passing your hand
once again extinguishes the flame. In addition
the burner is stopped automatically if the
burning time has expired. Alternatively the
burner can be stopped by a short push on the
function knob (1). Varying the burning time
1 sec - 2 h: see paragraph 3.2 "Sensor Auto-Off"
If the DoubleClick function is switched off, the flame ignites
IMMEDIATELy if the IR-Sensor is activated, i.e.: if a hand or an object is
within the detection range!
The status of the IR-Sensor is shown on the display.
If the IR-Sensor perceives a hand or an object in the
detection range, the "Sensor activated" symbol is
displayed. If the DoubleClick function is switched on to
activate the flame, (see paragraph 5.2) after the first
sensor activation, the "2x" symbol appears for the
duration of the DoubleClick time which has been set.
During this time pass your hand once again over the
sensor in order to ignite the flame. The settings for the
IR-Sensor (DoubleClick, DoubleClick time and detection
range) can be set individually (see paragraph 5.2).
As long as a hand or an object is present in the detection
range of the IR-Sensor and the IR-Sensor is activated
("Sensor activated" symbol is displayed), it is not
possible to switch over to setting the burning time.
To switch over from the application program "Sensor
Start-Stop" to another program, turn the function knob (1)
to the right or to the left.
Sensor Start-Stop
Fig. 3.3/1
Sensor activated
Fig. 3.3/2
2x-Symbol
!
i
flame is off. To do this, briefly press the function knob (1) in the application program.
The burning time blinks. The minutes can be varied by turning the function knob (1).
After setting the minutes, briefly push the function knob (1). The seconds can now be
varied by turning the function knob (1). Once the desired time has been set, briefly
press the function knob (1) to return to the application program. The burning time set
has been memorized.
When the burning time of the application program "Sensor Auto-Off" is set
to "00:00", the flame is burning as long as a hand is present in the detection
range of the IR-Sensor.
As long as a hand or an object is present in the detection range of the IR-Sensor
and the IR-Sensor is activated ("Sensor activated" symbol is displayed), it is not
possible to switch over to setting the burning time.
To switch over from the application program "Sensor Auto-Off" to another
program, turn the function knob (1) to the right or to the left.
!
i
i
EN
