![WLD-TEC Fuego SCS Скачать руководство пользователя страница 45](http://html1.mh-extra.com/html/wld-tec/fuego-scs/fuego-scs_instruction-manual_990733045.webp)
45
2. Operation
This section describes the operation of the unit with the function knob and the gas / air
adjustment, as well as the functioning of the internal charging function.
2.1 Switching on for the first time
Switch the unit on by a short push on the function knob (1). After switching on,
installation and operating instructions appear before the device can be used for its
intended purpose. These instructions can be switched forward every time by a short
push on the function knob (for a summary of the instructions see enclosure 1).
The installation and operating instructions
end with the display how to use the gas / air
knob. Subsequently the unit switches over
automatically to the user selection function,
just as when switching on normally on later
occasions.
Do not display installation and
operating instructions again
Display installation and operating
instructions again
Fig. 2.1/1
i
2.2 Switching on, selecting user
The unit is switched on by a short push on the function knob (1). After switching on,
within a few seconds the selection between "User 1" or "User 2" can be made by
turning the function knob (1). Selecting the user account always takes place only
when switching on the unit. To change user, switch the unit off and back on again.
Both user accounts save all burning
times, settings, parameters and the
application program last used
depending on user.
i
User account selection
Fig. 2.2/1
The next five times the unit is switched
on, the user can select whether the
installation and operating instructions are
to be displayed once again or whether
installation has been successfully carried
out. Once confirmation has been given
that the installation and operating
instructions have been successfully
concluded, the request for confirmation
is no longer displayed.
2.3 Menu navigation
Navigating through the function menu and the settings of various parameters is carried
out using only the function knob (1). Depending on the
arrows on the graphic display, all menu items can be
selected and exited by turning or pushing this knob.
The arrows on the display indicate in which direction the
next menu items are accessible. If a submenu is selected
by pushing the knob, the arrow blinks and also the
Fig. 2.3/1
left
right
Navigation arrows
push
EN