![WLD-TEC Fuego SCS Скачать руководство пользователя страница 47](http://html1.mh-extra.com/html/wld-tec/fuego-scs/fuego-scs_instruction-manual_990733047.webp)
47
The FLAME IGNITES! Ensure you
turn off the gas supply BEFORE
actuating the knob during the switch
off routine!
The entire procedure takes approx.15 seconds.
Thereafter, the unit switches off of its own
accord. If the function knob is not pressed
during the animated display, the unit switches
off after approx. 10 seconds on its own.
Turn off gas supply
Push function knob
Fig. 2.5/1
Caution! Flame - pressure is being
reduced
!
i
If the function knob is not actuated during
the switch off routine, the supply hose
is still under pressure! The switch-off
routine can be curtailed if, during the
animated display, the function knob is
pressed for longer than 2 seconds. Then
the device switches off immediately.
2.6 [Fuego pro] Internal charging function, battery symbol
If the unit is operated with rechargeable
batteries independent of mains electricity,
the battery symbol appears after several
seconds (instead of the menu arrows) when
the unit is switched on. The symbol appears
to be "emptying" depending on the condition
of the batteries. If the batteries are low the
unit start to "beep" every 10 seconds ("Beep-signal" only if buzzer is turned on, see
paragraph 5.5). If the completely empty battery symbol begins to blink, there are only
a few minutes use remaining before the unit switches off entirely. In order to continue
operation independent of mains electricity, charge the batteries. Charging takes
place independently of whether the device is on or off. Charging starts automatically
depending on battery condition as soon as the power cable is plugged into the socket
(9). While charging, a battery being filled is displayed. The unit can be used quite
normally during the charging process.
The batteries are charged only if the power cord of the included power supply is
inserted directly into the socket (9). If the power supply is connected indirectly over
a foot pedal (optional) so that the power cord is inserted in the socket of the foot
switch, the batteries are not charged for technical reasons.
Information about the optional use of an external battery charger is available in
paragraph 8.
If the battery symbol does not appear when charging discharged batteries,
the batteries could be exhaustive discharged. Extremely exhaustive
discharged batteries cannot be charged. Use an external charging station.
Battery symbol
Fig. 2.6/1
i
!
EN