manualshive.com logo in svg

WinGD X92DF, Руководство по эксплуатации

Поделиться
Скачать
WinGD X92DF Скачать руководство пользователя страница 152

5.1.3

Thrust bearing

The thrust bearing is installed on the crankshaft at the driving end of the engine. The thrust
bearing flange (014, 

Figure 5-3

) transmits the axial thrust from the propeller through the thrust

pads into the bedplate:

•

The thrust pads on the engine side adapt the propeller thrust of the ahead direction.

•

The thrust pads on the driving end adapt the propeller thrust of the astern direction.

The thrust pads adapt to the clockwise or counterclockwise rotation of the engine.

The arbor supports (004) prevent circular movement of the thrust pads.

Bearing oil flows through the oil pipe (002) to the two nozzles (003). The oil flows out of the two
nozzles as a spray, which becomes an oil layer between the thrust bearing flange (014) and the
thrust pads (006, 013).

X92DF

AA00-1203-00AAA-043A-A

Operation Manual

Thrust bearing

Winterthur Gas & Diesel Ltd.

- 152 -

Issue 002 2020-08

Содержание X92DF

































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды