Wheatstone Corporation WheatNet-IP BLADE3, Техническое руководство

Страница: 357 / 366

WheatNet-IP BLADE 3 / June 2018
page A – 128
A P P E N D I C E S
Example 3: Sending a WNIP audio stream to an Axia xNode using
1/4ms packet timing
So the first step in this example is to decide which stream(s) you want to send to the
xNode and copy their multicast address(es).
Once you’ve identified the desired WNIP streams and copied their multicast addresses,
open a browser window on the xNode device and choose the “Destinations” menu item.
WNIP stream multicast address and port
In the xNode destina‑
tions window, enter the
desired WNIP stream infor‑
mation for the destination.
Use the format multicast
address:port number.
Once you’ve entered
the information and hit
“Apply”, you can exit the
browser session and you’re
ready to start streaming from
WNIP to xNode. First though its important to have a clear understanding of the differences
between sources and destinations in AoIP.
In this example, the process is very similar to the first example, except that the devices
are reversed: WNIP AES67 is the source device and xNode is the destination.
For 1/4ms packet timing the tasks are simplified because WNIP automatically creates
streams for every WNIP source as soon as it enters the system. Again, the sources and their
stream details are shown in the Navigator‑‑‑>System View‑‑‑>Source Streams window. All
WNIP sources in the system will show in this window, and any time you add new WNIP
devices their source streams will be added to the list automatically.