Wheatstone Corporation WheatNet-IP BLADE3 Скачать руководство пользователя страница 134

Страница: 134 / 366

page 5 – 18

WheatNet-IP BLADE 3

/ July 2018

W H E A T N E T - I P N A V I G A T O R G U I

An Important Point About WheatNet-IP Systems - The System Master

Because the WheatNet‑IP system is dynamic, there needs

to be some mechanism to arbitrate and maintain the specif‑

ics of the system configuration from moment to moment.

“Somebody has to be in charge!” In the WheatNet-IP system,

we don’t rely on a PC for this role; the entire system is fully

functional without any PCs. Since all BLADE 3s are electri

‑

cally identical (except for their specific audio I/O ports) the

system has been architected with a distributed intelligence.

Each and every BLADE 3 has enough on-board intelligence

to control the whole system by itself. During initial set up,

one of the BLADE 3s in the system is automatically selected

to be System Master. It is this System Master BLADE 3

that gathers all of the information from the BLADE 3s,

control surfaces, and PCs that belong to the system. The

Master BLADE 3 then redistributes all of this information

back to every BLADE 3. The Master BLADE 3 and all of

the others keep this information in flash memory so it is

not lost when the power is turned off. What this means is

that every BLADE 3 is fully capable of running the entire system at any moment. In

fact, if the Master BLADE 3 is lost for any reason, a new BLADE 3 will be elected as

Master and seamlessly take up running the system. The beauty of this architecture is the

depth of backup and redundancy automatically provided. Essentially there

are as many backup hosts in the system as you have BLADE 3s; you can

never lose your system because a host controller went down. The need for

archiving is also greatly reduced, because there is a system copy residing

in every BLADE 3. It’s like having a RAID array of hosts. If you look

carefully at the list of BLADE 3s in the System Pane, you will see one of

them designated as the current System Master. There is also a front panel

LED indicator that lights to show that the BLADE 3 is functioning as the

Route Master.

Similarly, the system will also have a Clock Master, responsible for synchronizing

timing throughout the system. If a Clock Master has been designated via the system

Info tab (see later in this chapter) by assigning a Primary External Reference, then that

BLADE 3 will be indicated in the System Pane by the “wave” icon – see Blade01 in the

example shown. If, however, no such assignment is made, the system will self‑designate

a Clock Master and flag it as such in the System Pane. Once again, a front panel LED

lights on the designated BLADE 3.

Note that in a single BLADE 3 system the one BLADE 3 will serve as both the System

Master and the Clock Master.

Содержание WheatNet-IP BLADE3















































































































































































































































































































































































Результаты поиска

Содержание WheatNet-IP BLADE3

Отзывы:

Wheatstone Corporation WheatNet-IP BLADE3, Техническое руководство, Страница: 134 / 366

Результаты поиска

Содержание WheatNet-IP BLADE3

Отзывы: