Wheatstone Corporation WheatNet-IP BLADE3, Техническое руководство

Страница: 270 / 366

page A – 44
WheatNet-IP BLADE 3 / Jan 2016
A P P E N D I C E S
In the WheatNet‑IP GUI, you will need to define two new signals for the logic func ‑
tion. You will need a logic source signal, representing the button, and a logic destination
signal, representing the DUMP connections on the airTools Delay unit. First click on
BLADE #1 in the System Pane of the GUI to open the tab windows for BLADE #1. Click
on the Sources tab to open the sources window, and click on the Add... button to open the
Signal Definition Wizard. Click on LIO only as the signal type and give this new signal
a convenient name such as “Dump Sw.”
On the LIO Info tab of the Wizard, click on the Add box. Click on the “LIO 1 pin 7,”
and then select Input in the Direction: box as the logic direction (the DUMP switch will
be a logic Input). Finally
open the logic function drop
down menu and choose a
logic function. As mentioned
previously, the logic function
chosen is unimportant, the
requirement is that the device
you wish to control must also
use the same function. In this
case choose “User 1” as the
function; you can rename it
as “DUMP” if you like. Click
Apply , click Close , then click
Finish , and the new logic
source signal definition is
complete.