Wheatstone Corporation WheatNet-IP BLADE3, Техническое руководство

Страница: 159 / 366

page 5 – 43
WheatNet-IP BLADE 3 / July 2018
W H E A T N E T - I P N A V I G A T O R G U I
• Name - Location – The signals are identified on
the crosspoint grid by both their eight character
name and the eight character user defined
location. Including the location information
helps keep track of the signals, especially if
you have chosen to use the same name for
different signals.
• Name - Width – The signals are identified by both their eight character name and
audio width as defined for each signal – stereo, mono, lio.
• Signal ID - Name – The signals are identified on the crosspoint grid by both their
signal ID and their eight character name. This mode is especially useful during set
up as each signal is clearly identified by its ID. These are set by the system and
absolutely unique. This setting is automatically selected when the GUI is installed.
Default Sort Order
This section allows you to specify a default sort order
for the way sources and destinations are displayed. The
choices are:
• BLADE Id - Name – This is the default. The
signals show in order of BLADE 3 ID then
alphabetically by name.
• BLADE Id - Pin – The signals show in order of
BLADE 3 ID first, then connector number.
• BLADE Id - Location – The signals show in
order of BLADE 3 ID, then alphabetically by
location name.
• Name - Blade Id – The signals show alphabetically by name first, then by BLADE 3
ID. Useful for when you use a name like “CD 1” over and over.
• Name - Location – The signals show alphabetically by name first, then by location
name.
• Location - Blade Id – The signals show alphabetically by location name, then by
BLADE 3 ID.
• Signal Id – The signals show in order of their system assigned signal ID.
Check Boxes
The functions are:
• Use Dotted Signal IDs – Changes how the Sig ‑
nal IDs are displayed between hexadecimal and
standard decimal forms.
• Use Style Sheet – Changes background color from
grey to white for highest contrast.
• Use 24 Hour Time – Changes between 12 and
24 hour time format.
• Use Ctrl/Click to make/break a crosspoint connection – Enables having to hold Ctrl
down to change a crosspoint on the grid.
• Enable Advanced Controls – Enables the Logger options on the System Preferences
tab, and Master Preference options on each Blade Blade Info tab.