Wheatstone Corporation WheatNet-IP BLADE3, Техническое руководство, Страница: 179 / 366

page 5 – 63
WheatNet-IP BLADE 3 / July 2018
W H E A T N E T - I P N A V I G A T O R G U I
Add Alias Button
To Add Alias to your system follow
the same steps described above.
See page 5‑56 for the Alias feature
desription.
Edit Button
OK, so how do you modify the logic re‑
sources? Click on a signal name or location in
the Destination Signals: area, then click on the
Edit button. This opens a “Destination Signal
Wizard - Edit Signal” window where you can
redefine the audio signal type or, in this case,
add or change logic signals associated with the
audio. Use of this form has already been covered
in the Destination Details Menu section of this
chapter under the topic “Modify Signal.” The
“LIO Info” tab of this form is where you define
the logic associated with the audio signal.
Delete Button
The Delete button completes the signal modification tools. Highlight a signal and
choose “Delete” and the“Delete Signal” window with a question “Are you sure?” opens.
If you click on Yes, then the selected signal is removed from the
system, adding those resources back to the Free Recources: list.
Most folks will just use the automatic system defaults and not
bother with any of this initially, at least until they need to define
some logic signals. Don’t be afraid to experiment with defining
signals. You can always edit back any changes you make, and if
you really get things out of whack, you can just rerun the System
Startup Wizard for the BLADE 3 and start over.