Wheatstone Corporation WheatNet-IP BLADE3, Техническое руководство, Страница: 317 / 366

page A – 88
WheatNet-IP BLADE 3 / Jan 2016
A P P E N D I C E S
The other way to change the IP address is to click on the word BLADE next to the
ONLINE indicator.
This will bring up the change dialog, and the
rest of the procedure is the same as when started
from the menu.
Define Devices
If you plan on using any ACI command events you will need to define the device or
devices you want to control. From the menu, select File>Define Devices to bring up the
following form:
This is quite a busy form, so let’s take it on in sections.
The Current Settings area indicates any ACI devices that have already been set up.
Until you have set up one or more devices this area will indicate that all eight devices are
of type blade , and all of the IP Address entries will show . . . to indicate that they have
not been defined.
The New Settings area on the right also shows any settings that have already been made,
and allows you to easily add devices or edit existing devices.
The normal procedure for adding a device is to first use the Radio Buttons to specify if
the device type is BLADE (default), Surface , or Processor . Next, enter the IP Address of the
device in the spaces provided. It is important to correctly match the device type and the
IP Address since different device types use different ports for their ACI communications.
Editing is just as simple; change the device type, if needed, and enter the new IP Address.