manualshive.com logo in svg

Wheatstone Corporation WheatNet-IP BLADE3, Техническое руководство, Страница: 103 / 366

Поделиться
Скачать
Wheatstone Corporation WheatNet-IP BLADE3 Скачать руководство пользователя страница 103

page  4 – 3

WheatNet-IP BLADE 3

 

/ Jan 2016

E T H E R N E T   N E T W O R K S   A N D   S W I T C H E S

Unmanaged vs. Managed Switches

An unmanaged Ethernet switch is a low cost WYSIWYG device and has no 

 configuration software interface. Unmanaged switches do not support IGMP snooping 

and will therefore act as repeaters to IP audio multicast packets, effectively flooding all 

ports with audio packet traffic. Unmanaged switches are inexpensive, acceptable cost 

vs. performance compromise. 

Managed switches, on the other hand, allow users to configure the switch hardware 

with a software interface of some kind, such as Telnet, Web, Terminal, etc. Primary con‑

figuration features applicable to your Ethernet audio network are the ability to configure 

VLAN’s, IGMP management, built in diagnostics, and routing. We highly recommend 

the deployment of managed switches throughout the network.

Managed switches fall in to several market niches. Low end managed switches, 

or “Smart Switches,” offer some configuration, but may not provide the level of con

‑

figurability required in a medium to large Ethernet audio network. For example, these 

switches may forward IGMP host messages and multicast traffic but can not act as the 

IGMP router. In medium to large applications at least one switch capable of being the 

IGMP Querier is required. Mid-priced managed switches are better suited to the task 

and will provide more configuration flexibility. 

In larger systems it makes sense to employ a “core and edge” model. This type of 

system balances the switching horsepower (cost) according to the throughput  requirements 

at different physical segments of the network. Lighter bandwidth “edge” segments 

can use lower cost switches, while central rack room “core” segments utilize higher 

 performance  devices.

Rules of Thumb 

The WheatNet‑IP system will work with a minimum number of devices on an 

 unmanaged switch. If the system is to include more than six BLADE 3s, two Control 

Surfaces, and two PC drivers it is recommended that an IGMP compliant, managed 

switch be used. 

In large systems, careful attention must be paid to the placement of core and edge 

switches. 

• 

Each I/O (88a, 88d, 88ad) BLADE 3 requires 36.9Mb/s for eight Stereo connections.

• 

Each I/O (88a, 88d, 88ad) BLADE 3 Requires 73.7Mb/s for 16 Mono connections.

• 

Each Engine (e) requires 147.5Mb/s for 32 unique stereo connection streams.

• 

Each E-6 surface requires a 100Mb/s Ethernet connection.

•  Each Surface requires an Engine (e) connected to the same GbE switch.

• 

Each PC driver requires 19.6Mb/s for eight Stereo outputs.

• 

An  aggregate  of  eight  BLADE 3s  (64  streams)  requires  roughly  295Mb/s  of 

 bandwidth when each BLADE 3 have eight stereo connections.

The Multicast channels used by the WheatNet-IP System are as follows:

•  one per audio source

•  one for system announce messages

•  one for metering data

•  one for Logic messages.

WheatNet-IP BLADE 3

 

/ Feb 2019

Содержание WheatNet-IP BLADE3















































































































































































































































































































































































Отзывы:

Нет отзывов