Wexxar WF-10T, Руководство по эксплуатации и обслуживанию

Страница: 87 / 156

WF-10T Case Former Machine Maintenance
- 8-75 -
Check the ‘S’ box for Satisfactory Performance and ‘US’ box for Unsatisfactory Performance.
Table 25: Cleaning the Machine
8.4
Preventative Maintenance Schedule
Daily
•
Keep framework and conveyor belts clean of dirt build-up, grease and oil residues.
•
Check drivebelts for wear.
•
Verify that the air pressure is regulated to the proper setting (90 PSI), and that any water
is drained from the filter.
•
Check for worn or broken electrical and air connections.
•
Visually inspect the machine for loose fasteners, leaks in the pneumatic system, and
drain bottle overflow.
•
Clean the tape knife on the Dekka Tape Head with solvent and lubricate the blade guard
pad with WD-40 or a similar low toxicity product.
Every 3 Weeks
•
Lubricate Uni-Drive side-belt drive chain and width adjustment roller chain with a chain
spray lube.
•
Inspect electric motor for evidence of oil leakage, noise, or vibration.
•
Keep unit free of dirt. Excess accumulation of dirt or grease will affect the proper cooling
of the units.
•
Check belt condition, tracking, and tension.
Maintenance and Cleaning
Cleaning
S US
Remove any corrugated fragment deposits that have accumulated.
Check the pneumatic filter bowl filter for debris.
Clean the filter bowl with soapy water (optional).
Replace the filter bowl.
WARNING!
The blade is sharp and can cause serious injury.
NOTE: Correct tension and tracking will prolong belt and
drive bearing life.