Wexxar WF-10T, Руководство по эксплуатации и обслуживанию

Страница: 75 / 156

WF-10T Case Former Case Size Adjustments
7-63
7.9.3 Bottom Carriage Jawplate Pin & Dome Position
Adjustments
The position and extension of the pins that are inserted into the edges of the bottom flaps when
the case is injected down onto them and that ‘grip’ the case for opening may need to be adjusted
depending on the case size and proportions. The pins are intended to engage the longer major
flaps only and must be repositioned, retracted or removed if they will engage the shorter minor
flaps or if they will hit pins on the other jawplate when in the closed position. The need to change
the pin and dome positions will be most likely with small or narrow-width cases.
Figure 7-24: Pin & Dome Position Adjustments
Pin blocks can be
removed, if necessary
Pin blocks
must be
positioned
so they don’t
contact
blocks on
the opposite
jawplate and
prevent the
plates from
fully closing.
Pins interfering
with case erecting Retracting pins