Wexxar WF-10T, Руководство по эксплуатации и обслуживанию

Страница: 43 / 156

WF-10T Case Former Controls
5-31
5.6
BOX CALL Mode
The
BOX CALL
mode provides the highest
level of control over the production of boxes.
It limits the machine to the production of a box
only when it is called for by the operator. To
activate the
BOX CALL
mode, touch
the
‘BOX CALL OFF/ON’
toggle switch located in
the right-hand center of the
‘Setup’
screen.
The toggle switch will turn green and its label
will change to
‘BOX CALL ON’
. At the same
time, the remotely controlled
‘BOX CALL’
button will be enabled. Press the
‘BOX
CALL’
button each time a new box is
required.
NOTE: Because the REMOTE DEMAND mode is prioritized over
the BOX CALL mode, if both modes are activated simultaneously
and the remote demand sensor senses the presence of a case
downstream of the machine, the machine will ignore a signal
from the ‘BOX CALL’ button.
Figure 5-34: BOX CALL Function
Figure 5-31: 'BOX
CALL’ Button
.
Figure 5-32: 'REMOTE
DEMAND OFF/ON’
Toggle Switch
Figure 5-33: REMOTE
DEMAND Indicator